page 1 of 5 the big deal product overview PGA-103+ (rohs compliant) is an advanced wideband amplifer fabricated using e-phemt technology and offers extremely high dynamic range over a broad frequency range and with low noise fgure. in addi - tion, the PGA-103+ has good input and output return loss over a broad frequency range without the need for external matching components and has demonstrated excellent reliability. lead fnish is snagni. it has repeatable performance from lot to lot and is enclosed in a sot-89 package for very good thermal perfor - mance. feature advantages broad band: 0.05 to 4.0 ghz broadband covering primary wireless communications bands: cellular, pcs, lte, wimax ultra high ip3 versus dc power consumption: 45 dbm typical at 2 ghz at +5.0v supply voltage and only 97ma the PGA-103+ provides excellent ip3 performance relative to device size and power consumption. the combination of the design and e-phemt structure provides en - hanced linearity over a broad frequency range as evidence in the ip3 being typically 20 db above the p 1db point. this feature makes this amplifer ideal for use in: ? driver amplifers for complex waveform up converter paths ? drivers in linearized transmit systems ? secondary amplifers in ultra high dynamic range receivers low noise figure: 0.6 db up to 1.0 ghz a unique feature of the PGA-103+ which separates this design from all competitors is the low noise fgure performance in combination with the high dynamic range. PGA-103+ key features 50? 0.05 to 4 ghz sot-89 package ? ultra high ip3 ? broadband high dynamic range ? may be used as a replacement for rfmd spf-5189z a,b ultra linear low noise notes: a. suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. the rfmd spf-5189z part number is used for identifcation and comparison purposes only. monolithic amplifer notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 2 of 5 simplifed schematic and pin description function pin number description rf in 1 rf input pin. this pin requires the use of an external dc blocking capacitor chosen for the frequency of operation. rf-out and dc-in 3 rf output and bias pin. dc voltage is present on this pin; therefore a dc blocking capacitor is necessary for proper operation. an rf choke is needed to feed dc bias without loss of rf signal due to the bias connection, as shown in recommended ap - plication circuit, fig. 2 gnd 2,4 connections to ground. use via holes as shown in suggested layout for pcb design to reduce ground path inductance for best performance. 0.05-4 ghz case style: df782 PGA-103+ product features ? 5v/3v operation ? high ip3, 45 dbm typ. at 2 ghz, vd=5v ? low noise figure, 0.6 at 1 ghz; 0.9 db at 2 ghz ? gain, 11.0 db typ. at 2 ghz ? p1db 22.5 dbm typ. at 2 ghz at vd=5v ? protected under us patent 8,803,612 rev. a m151107 PGA-103+ th/rs/cp 150924 general description PGA-103+ (rohs compliant) is an advanced wideband amplifer fabricated using e-phemt technology and offers extremely high dynamic range over a broad frequency range and with low noise fgure. in addition, the PGA-103+ has good input and output return loss over a broad frequency range without the need for external matching components. lead fnish is snagni. it has repeatable performance from lot to lot and is enclosed in a sot-89 package for very good thermal performance. typical applications ? base station infrastructure ? portable wireless ? catv & dbs ? mmds & wireless lan ? lte 3 rf-out & dc-in 2 ground 1 rf-in 4 rf-in rf-out and dc-in gnd ultra linear low noise notes: a. suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. the rfmd spf-5189z part number is used for identifcation and comparison purposes only. monolithic amplifer notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 3 of 5 parameter ratings operating temperature (ground lead) -40c to 85c storage temperature -65c to 150c operating current at 5.0v 200 ma power dissipation at 5.0v 1w input power (cw) +21 dbm (50 to 2000 mhz) +26 dbm (2000 to 4000 mhz) dc voltage on pin 3 6v note: permanent damage may occur if any of these limits are exceeded. electrical maximum ratings are not intended for continuous normal operation. absolute maximum ratings electrical specifcations (1) at 25c, 50 ? , unless noted PGA-103+ (1) measured on mini-circuits characterization test board tb-313. see characterization test circuit (fig. 1) (2) current increases at p1db parameter condition (ghz) vd=5v vd=3v min. typ. max. typ. units frequency range 0.05 4.0 ghz gain 0.05 26.5 25.9 db 0.4 22.1 21.6 1.0 14.7 16.2 18.0 15.8 2.0 11.0 10.6 3.0 8.1 7.7 4.0 6.2 5.9 noise figure 0.05 0.5 0.5 db 0.4 0.5 0.5 1.0 0.6 0.6 2.0 0.9 0.9 3.0 1.2 1.2 4.0 1.5 1.4 input return loss 0.05 6.7 6.1 db 0.4 11.3 10.4 1.0 10.0 13.0 12.0 2.0 12.8 13.0 3.0 13.7 13.0 4.0 15.0 14.2 output return loss 0.05 14.1 13.8 db 0.4 23.8 25.5 1.0 10.0 21.8 30.6 2.0 20.6 26.4 3.0 17.2 20.8 4.0 16.0 19.2 reverse isolation 1.0 21.2 20.5 db output power @1 db compression (2) 0.05 20.0 15.4 dbm 0.4 21.5 18.2 1.0 22.5 18.7 2.0 22.5 19.3 3.0 22.9 20.0 4.0 23.2 20.7 output ip3 0.05 36.7 32.4 dbm 0.4 39.0 34.1 1.0 41.9 34.5 2.0 40.0 44.6 35.6 3.0 44.3 35.6 4.0 45.4 35.3 device operating voltage 4.8 5.0 5.2 3.0 v device operating current 97 120 60 ma device current variation vs. temperature -178 -54 a/c device current variation vs voltage 0.014 0.018 ma/mv thermal resistance, junction-to-ground lead 36 36 c/w notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com monolithic e-phemt mmic amplifer
page 4 of 5 PGA-103+ fig 1 . block diagram of test circuit used for characterization. (dut tested on mini-circuits characterization test board tb-313) gain, return loss, output power at 1db compression (p1 db) , output ip3 (oip3) and noise fgure measured using agilents n5242a pna-x microwave network analyzer. conditions: 1. gain and return loss: pin= -25dbm 2. output ip3 (oip3): two tones, spaced 1 mhz apart, 5 dbm/tone at output. characterization test circuit p103 recommended application circuit product marking tb-313 vcc (supply voltage) vd bias-tee zx85-12g-s+ blk-18+ rf-in rf-out dut 1 2,4 3 3/5v cblock=0.001f, bias-tee=tcbt-14+, cbypass=0.1f fig 2a . evaluation board tb-678-103+ includes case, connectors and components soldered to pcb fig 2b . evaluation board tb-761-103+ unconditionally stable (see note an-60-064) seq manufacturer p/n / value size a1 PGA-103+ c1, c2 .01 uf 0805 c3 0.33 uf 1206 c4 10 uf 1206 c5 330 pf 0603 l1 tcch-80+ l2 620 nh .115x.110 r2 150 ohm 0603 gain 0.05 26.5 25.9 db 0.4 22.1 21.6 1.0 14.7 16.2 18.0 15.8 2.0 11.0 10.6 3.0 8.1 7.7 4.0 6.2 5.9 noise figure 0.05 0.5 0.5 db 0.4 0.5 0.5 1.0 0.6 0.6 2.0 0.9 0.9 3.0 1.2 1.2 4.0 1.5 1.4 input return loss 0.05 6.7 6.1 db 0.4 11.3 10.4 1.0 10.0 13.0 12.0 2.0 12.8 13.0 3.0 13.7 13.0 4.0 15.0 14.2 output return loss 0.05 14.1 13.8 db 0.4 23.8 25.5 1.0 10.0 21.8 30.6 2.0 20.6 26.4 3.0 17.2 20.8 4.0 16.0 19.2 reverse isolation 1.0 21.2 20.5 db output power @1 db compression (2) 0.05 20.0 15.4 dbm 0.4 21.5 18.2 1.0 22.5 18.7 2.0 22.5 19.3 3.0 22.9 20.0 4.0 23.2 20.7 output ip3 0.05 36.7 32.4 dbm 0.4 39.0 34.1 1.0 41.9 34.5 2.0 40.0 44.6 35.6 3.0 44.3 35.6 4.0 45.4 35.3 device operating voltage 4.8 5.0 5.2 3.0 v device operating current 97 120 60 ma device current variation vs. temperature -178 -54 a/c device current variation vs voltage 0.014 0.018 ma/mv thermal resistance, junction-to-ground lead 36 36 c/w notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com monolithic e-phemt mmic amplifer
page 5 of 5 PGA-103+ visual inspection electrical test sam analysis refow 3 cycles, 260c soak 85c/85rh 168 hours bake at 125c, 24 hours visual inspection electrical test sam analysis start msl test flow chart esd rating human body model (hbm): class 1a (250 to <500v) in accordance with ansi/esd stm 5.1 - 2001 machine model (mm): class m1(25v) in accordance with ansi/esd stm5.2-1999 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d attention observe precautions for handling electrostatic sensitive devices performance data data table swept graphs s-parameter (s2p files) data set (.zip fle) case style df782 (sot 89) plastic package, exposed paddle lead fnish: tin-silver over nickel tape & reel f55 standard quantities available on reel 7 reels with 20, 50, 100, 200, 500 or 1k devices suggested layout for pcb design pl-313 evaluation board tb-678-103+ tb-761-103+ (see application note an-60-064) environmental ratings env08t1 additional detailed technical information additional information is available on our dash board. to access this information click here notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com monolithic e-phemt mmic amplifer
|
